ALPHA WIRE Part Number: 75012 Page 1 of 2 Pages A. Construction 1) Component 1 a) Conductor b) Insulation (1) Color(s) Pair 1 Color BLU - WHT/BLU c) 2) 3) 4) B. Applicable Specifications 1) UL 2) C. D. E. Pair (1) Lay Length: Cable Assembly a) Twists: b) Core Wrap: Shield: a) Drain Wire b) Braid Jacket a) Color(s) b) Ripcord c) Print CSA International CUSTOMER PRODUCT SPECIFICATION Issue: Issue Date: Effective Date: 2 4/18/2012 4/24/2012 Diameters (In) 2 X 1 PAIR 24 (SOLID) AWG BC 0.014" Wall, Nom. Polypropylene (PP) Pair 2 Color ORG - WHT/ORG 0.023 0.050 Pair Color 2/Cond Cabled Together Various Lay 2 Components Bunch Cabled 4.0 Twists/foot Clear Mylar Tape, 25% Overlap, Min. A/P/A Tape, 25% Overlap, Min. 26 (SOLID) AWG TC TC,70% Coverage, Min. 0.035 Wall, Nom. TPE 0.325 (0.345 Max.) BLACK Nylon ALPHA WIRE-* P/N 75012 2PR 24 AWG XTRA-GUARD(R) INDUSTRIAL ETHERNET (UL) C(UL) TYPE CMR 75C FT4 ANSI/TIA-568-C.2 CAT5E VERIFIED ROHS (SEQUENTIAL FOOTAGE MARKING) * = Factory Code CMR 75C FT4 C(UL) TYPE CMR 75C FT4 LVD 73/23/EEC Amendment 93/68/EEC 3) CE: Environmental Compliance 1) EU Directive 2002/95/EC(RoHS): All materials used in the manufacture and packaging of this part must meet the requirement of EU Directive 2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and electronic equipment. Physical & Mechanical Properties 1) Temperature Range -50 to 105C 2) Bend Radius 8X Cable Diameter 3) Pull Tension 21.1 Lbs, Maximum 4) Sunlight Resistance Yes Electrical Properties (For Engineering purposes only) 1) Voltage Rating 300 VRMS 2) Characteristic Impedance 100 +/- 15 3) Mutual Capacitance 5.6 nF/100m Max 4) Velocity of Propagation 70 % Nom. 5) Conductor DCR 9.38 /100m Max 6) Skew 45 ns/100m Max 7) Pair to Ground Unbalance 330 pF/100m Max 8) DC Unbalance of a Pair 5% Max This specification outlines the requirements for the product(s) described herein. Deviations from this specification are not permitted without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the specification and noncompliance or unauthorized deviations will be cause for rejection and return of product. If vendor certifying agency requirements are in conflict with this document, it is incumbent upon the vendor to notify the Alpha Wire Engineering Department and mark up differences on this document and submit them for review and approval prior to any production. Be advised that product legend information and product legend information and product label information must be in concert; both are the responsibility of the vendor. It is the responsibility of the vendor to insure that this product meets the requirements of subservient certifying agency documents even though they are not directly noted herein. All information contained herein is confidential. Its use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department. 711 Lidgerwood Ave Elizabeth, NJ 07207-0711 Toll Free 1-800-52 ALPHA * T: 1-908-925-8000 * F: 908-925-5411 * Email: info@alphawire.com www.alphawire.com ALPHA WIRE Part Number: 75012 Page 2 of 2 Pages 9) F. Insertion Loss Other 1) Packaging a) 1000 FT b) 500 FT CUSTOMER PRODUCT SPECIFICATION Issue: Issue Date: Effective Date: 2 4/18/2012 4/24/2012 2.4 (Max dB/100m ) @ 1 MHz 4.9 (Max dB/100m ) @ 4 MHz 6.9 (Max dB/100m ) @ 8 MHz 7.8 (Max dB/100m ) @ 10 MHz 9.9 (Max dB/100m ) @ 16 MHz 11.1 (Max dB/100m ) @ 20 MHz 12.5 (Max dB/100m ) @ 25 MHz 14.1 (Max dB/100m ) @ 31.25 MHz 20.4 (Max dB/100m ) @ 62.5 MHz 26.4 (Max dB/100m ) @ 100 MHz Flange x Traverse x Barrel (inches) 18 x 10.5 x 8 Continuous length 12.5 x 9 x 8 Continuous length [Spool dimensions may vary slightly] This specification outlines the requirements for the product(s) described herein. Deviations from this specification are not permitted without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the specification and noncompliance or unauthorized deviations will be cause for rejection and return of product. If vendor certifying agency requirements are in conflict with this document, it is incumbent upon the vendor to notify the Alpha Wire Engineering Department and mark up differences on this document and submit them for review and approval prior to any production. Be advised that product legend information and product legend information and product label information must be in concert; both are the responsibility of the vendor. It is the responsibility of the vendor to insure that this product meets the requirements of subservient certifying agency documents even though they are not directly noted herein. All information contained herein is confidential. Its use is restricted to authorized Alpha Wire Company personnel or authorized vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department. 711 Lidgerwood Ave Elizabeth, NJ 07207-0711 Toll Free 1-800-52 ALPHA * T: 1-908-925-8000 * F: 908-925-5411 * Email: info@alphawire.com www.alphawire.com